Chipmakers have recently been working to make processors more efficient, which means they generate
less heat. Nonetheless, some modern processors still generate a lot of heat. That’s why all processors require some sort of cooling element, typically a fan of some type. A system’s Thermal Design Point (TDP) rating indicates, in watts, how much heat it can safely dissipate without exceeding the maximum temperature for the chip. When the processor temperature goes over spec, the system can slow down
or run erratically (lock up) or may simply reboot. The processor fan may fail for several reason
Dust is preventing the fan from spinning smoothly.
The fan motor has failed.
The fan bearings are loose and jiggling.
Often, you can tell if there is a fan problem by listening and/or touching the computer. A fan that has
loose bearings starts jiggling and vibrates the case, making a characteristic noise. As time goes by, the sounds and vibrations will become so prominent that you’ll change the fan out just to regain some peace and quiet.
You don’t always need to replace the fan. If it is covered with dust, you can often spray away the dust with compressed air. But even though you might get the fan running again, its life span has likely been reduced because of the overwork. You should keep an extra fan in reserve in case of failure.
Processors may also overheat because the heat sink is not properly placed above the processor or the thermal paste is not of good quality or was applied incorrectly (or not at all) when the system was built. This is more likely to be a problem with home-built systems but can happen with commercially manufactured ones as well. The paste can break down over time, and you may need to reapply it.
Case design is another element that can contribute to or help prevent overheating. Cases with extra fans, better vents, and adequate room inside for good airflow may cost more but can provide superior cooling performance. Small cases that squeeze components together can cause overheating. For this reason, laptops with powerful processors are prone to overheating.
Tip
Another common reason for processor overheating is overclocking. Until heat begins to take its toll, overclocking does allow for significant performance improvements. Because processor overclocking can really cook a processor, most dedicated overclockers do not use regular processor fans. Instead, they use complex — and expensive — water-cooling systems.
Overheating can also be caused by the external temperature (that is, the temperature in the room). Computers no longer have to be kept in cold rooms as they did in the early days of computing, but if the room temperature goes above 80, you may find your computers exhibiting the symptoms of overheating. If the temperature is uncomfortable for you, it’s probably too high for your computers. Adequate ventilation is also important.
Most computers today have an option to display the CPU temperature in the BIOS.
No comments:
Post a Comment